Our most requested glass support post, this two-piece design is standard on all Rinkmaster® DSSA dasher installations. Self-supporting post needs no additional reinforcement. Position anywhere on the caprail for more uniformity in shielding dimensions. Handles larger, heavier shielding such as tempered glass. Support posts extend within 2" of the top of the glass to minimize breaking and chipping. Removable mullion allows easy replacement of shielding from inside the rink. Extruded structural aluminum alloy. Available in either standard mill-finish, or several colors of anodizing (additional cost). PVC cushions available for 1/2" or 5/8" thickness to prevent shield contact with metal.

Post #331-0040 Mullion #331-0050

Aluminum supports offer simple and effective solutions to installing dasherboard shielding. Channels either slide into dasher frames or attach to 2"x2" steel supports. L-Channel designed to support shielding in corners at player and penalty boxes. Gives finished look at gates and other shielding termination points. Channels made of extruded structural aluminum alloy for 1/2" standard and can be modified to accept 5/8" thick shielding. Available in standard mill-finish or several colors of anodizing (additional cost). Rigid cushions available for either 1/2" or 5/8" thickness to prevent shield contact with the metal.

H #331-0020; L #331-0030

Alternate method of mounting shields or direct replacement to existing systems. 2" wide T-bar is a removable face and can be adapted to fit various shield thicknesses. Zinc-plated T-bar anchors to 2"x2" vertical post. Adhesive-backed foam tape cushion to absorb impact and prevent metal-to-shield contact.

Avoid routing your caprail. Sill channel provides continuous support that allows shielding to withstand hockey impact. Minimizes breaking and chipping. Aluminum extruded for 1/2" standard can be modified to accept 5/8" thick shielding in either standard mill-finish, or several colors of anodizing (additional cost). Rigid cushions available for either 1/2" or 5/8" thickness to prevent shield contact with the metal.

Use this efficient clip to mount our Round Posts to the center horizontal member of your dasher frames.

Round Support Post Clip #331-0000

Our most requested glass support post, this two-piece design is standard on all Rinkmaster® DSSA dasher installations. Self-supporting post needs no additional reinforcement. Position anywhere on the caprail for more uniformity in shielding dimensions. Handles larger, heavier shielding such as tempered glass. Support posts extend within 2" of the top of the glass to minimize breaking and chipping. Removable mullion allows easy replacement of shielding from inside the rink. Extruded structural aluminum alloy. Available in either standard mill-finish, or several colors of anodizing (additional cost). PVC cushions available for 1/2" or 5/8" thickness to prevent shield contact with metal.

Protect your shielding by installing a cable kit on your end zones and gates. To use these kits for hanging safety drop netting, we supply a hand oval snap clip.

Engineered to provide optimum shielding protection, the glass cushion prevents contact with metal supports. Protects edges while reducing arena noise. Easy assembly. Please specify either rigid plastic for H, L and C Channels, or PVC for the two-piece support. Available for 1/2" and 5/8" thick shielding.