One-part polyurethane sealant ideal for filling between non-refrigerated and refrigerated slabs. Adheres to most surfaces without priming and maintains adhesion while expanding and contracting during temperature changes. Available in 1 quart tubes or 2 gallon pails, may be applied with tube or trowel. Skins over in 24 hours and cures to a firm rubber in 3 to 5 days.

Quart tube #125-0180
2 gal. pail #125-0160

Specifically designed for use in ice rinks as a concrete curing, sealing and hardening compound for fresh or existing concrete floors. Easily applied by sprayer or roller. White Floor-Seal™ on the rink floor creates a consistent white surface under the ice. Available in 5 gallon or 55 gallon drum.

A two-part epoxy that mixes to a pourable consistency that will run into and fill chips or cracks of varying depths and widths. The excess can be smoothed with a brush or trowel. It dries to form a hard-surfaced bond with the concrete. The epoxy color blends in with the surface. It can be mixed with sand or course aggregate as a filler.

1/2 gal. #125-0020
1 gal. #125-0010
2 gal. #125-0030

This quality sprayer speeds Floor-Seal application. Equipped with a neoprene hose and gaskets, it is designed for use with chlorinated compounds and the xylol solvents used to clean up Floor-Seal residue.

Floor-Seal™ Sprayer / Applicator #125-0070